An ACDelco GM Original Equipment Vapor Canister Purge Valve is an emission control component and is a GM-recommended replacement for your vehicle’s original component. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. This original equipment vapor canister purge valve has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Controls vapor flow from canister to engine GM-recommended replacement part for your GM vehicle’s original factory component Offering the quality, reliability, and durability of GM OE Manufactured to GM OE specification for fit, form, and function
13 reviews for GM Genuine Parts 12630282 Vapor Canister Vent Valve
0.0out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
Thomas Ross –
If you have a loud tapping most likely it’s this part.
Fixed my 2018 Silverado!! I thought I had a lifter tap but it ended up being this part!! Pretty simple install. Price is extremely reasonable and made my truck run normal again! It will still make a ticking noise but not as loud as the old one that was sticking internally. Fast to install compared to a lifter!! No leaks here the rubber o-ring is good quality too. But when you install it put a little engine oil on the o-ring to make the installation easier. In the video you can hear my truck idling normally it used to be rough. Picture is the old part 100% match and function. I’ll will also replace the evap solenoid that by the gas tank to seeming that it’s a part routinely changed.
Helpful(0)Unhelpful(0)You have already voted this
ja –
OEM Part
18 Yukon 5.3 fixed my issue . OEM part it’s a 10 min fix . Make sure you lube the oring .Tip remove vac line, then 10mm bolt pull part out THEN remove electrical connector don’t forget it has the red lock tab. Then reverser order hook electrical connector back up, install part tighten bolt, then hook the vac line back up .
Helpful(0)Unhelpful(0)You have already voted this
RANDAY –
OEM Part Replacement
Didn’t resolve my check engine light, but was part of the problem. Can’t go wrong with OEM parts.
Helpful(0)Unhelpful(0)You have already voted this
Derek –
perfect fit on 2017 yukon 6.2 .
perfect fit on 2017 yukon 6.2 .
Helpful(0)Unhelpful(0)You have already voted this
J17 –
Genuine
It’s a genuine part so little to say. Took me no more than 5 minutes to replace.
Helpful(0)Unhelpful(0)You have already voted this
Jack Hamilton –
Great price. Right part!
Exactly what I needed to fix the check engine light on my Yukon.
Helpful(0)Unhelpful(0)You have already voted this
Greg Hanna –
P0449 Engine Code Fix
Why did you pick this product vs others?:AC DELCO part for OEM Silverado. Fixed code P0449
Helpful(0)Unhelpful(0)You have already voted this
CMedic –
It fits it ships
Put this on our GMC Yukon SLT 15. part came as described. Seemed to line up with the OEM one. Good value for money. Replacement was a pain as it seems common practice to use lots of plastic connections that become brittle with age and wear requiring additional parts to replace them should you break a clip. No engine codes after replacement. Would recommend.
Helpful(0)Unhelpful(0)You have already voted this
Sergio gomez –
funciona muy bien en mi auto
Helpful(0)Unhelpful(0)You have already voted this
James Simpson –
Worked as should and great product
Helpful(0)Unhelpful(0)You have already voted this
Awaji –
المنتج أصلي ونفس حق الوكالة
Helpful(0)Unhelpful(0)You have already voted this
dave –
Changed the part but canister at gas tank sensor was the problem
Thomas Ross –
If you have a loud tapping most likely it’s this part.
Fixed my 2018 Silverado!! I thought I had a lifter tap but it ended up being this part!! Pretty simple install. Price is extremely reasonable and made my truck run normal again! It will still make a ticking noise but not as loud as the old one that was sticking internally. Fast to install compared to a lifter!! No leaks here the rubber o-ring is good quality too. But when you install it put a little engine oil on the o-ring to make the installation easier. In the video you can hear my truck idling normally it used to be rough. Picture is the old part 100% match and function. I’ll will also replace the evap solenoid that by the gas tank to seeming that it’s a part routinely changed.
ja –
OEM Part
18 Yukon 5.3 fixed my issue . OEM part it’s a 10 min fix . Make sure you lube the oring .Tip remove vac line, then 10mm bolt pull part out THEN remove electrical connector don’t forget it has the red lock tab. Then reverser order hook electrical connector back up, install part tighten bolt, then hook the vac line back up .
RANDAY –
OEM Part Replacement
Didn’t resolve my check engine light, but was part of the problem. Can’t go wrong with OEM parts.
Derek –
perfect fit on 2017 yukon 6.2 .
perfect fit on 2017 yukon 6.2 .
J17 –
Genuine
It’s a genuine part so little to say. Took me no more than 5 minutes to replace.
Jack Hamilton –
Great price. Right part!
Exactly what I needed to fix the check engine light on my Yukon.
Greg Hanna –
P0449 Engine Code Fix
Why did you pick this product vs others?:AC DELCO part for OEM Silverado. Fixed code P0449
CMedic –
It fits it ships
Put this on our GMC Yukon SLT 15. part came as described. Seemed to line up with the OEM one. Good value for money. Replacement was a pain as it seems common practice to use lots of plastic connections that become brittle with age and wear requiring additional parts to replace them should you break a clip. No engine codes after replacement. Would recommend.
Sergio gomez –
funciona muy bien en mi auto
James Simpson –
Worked as should and great product
Awaji –
المنتج أصلي ونفس حق الوكالة
dave –
Changed the part but canister at gas tank sensor was the problem
Peter Kotelko –
Oem product in original packaging