Rev-A-Shelf 5″ Pullout Kitchen Cabinet Storage Organizer Slide Out Pantry Spice Rack with Adjustable Shelves for 5.5″ W Cabinet Opening, 448-BC-5C

Perfect Fit, Smooth Glide, and Great Quality!
This pullout shelf exceeded my expectations! The build quality is solid, the wood feels premium, and the glide mechanism is extremely smooth and quiet. Installation was straightforward, and it fit perfectly inside my cabinet without any issues. It instantly added more organization and made my spices/oils so much easier to access.If you’re looking to maximize cabinet space and want something that looks and feels high-end, this is absolutely worth it. Highly recommended!

Quality Product, Watch the Video on Product Description.
Super Happy with this product. This is a quality product! I did not get paid and I rarely write reviews. This is a wordy post but it may help someone who is non handy with their install. Item was delivered via FedEx undamaged. This may not be the best way, but the skinny spaces you are limited getting at it.Watch the amazon video when browsing thru product description. My goal was not to have 19 holes in my cabinets when it only requires 10 if you do it right the first time. A paper template would be great, but does not come with product and my rack I bought is so narrow a template might not have been easy to layout anyway. I purchased the 3″ rack, 4 tiers. It is narrow you can eyeball back positioning pretty easy when mounting. Cabinet mountain Area is skinny so precise measuring in back would be tricky one handed operation at best.I placed entire assy in cabinet.Slide out the 4 horizontal door face mount tabs and snuggled then up on cabinet face frame and position the base in cabinet void as if it would be when permanently mounted door. True test fit.I then traced with ink cartridge from a ball point ink pen around foot print of the 2 base feet. Helped my cabinets are painted white I am sure. I had to take out ink tube from ball point because tracing around there are clearance problems tracing (more like scratching at base trying to get ink pen to mark perimeter) but easily do able. At this point check your left right gap on upper frame. Make sure you are pretty square up and down with appropriate included upper shims. Mark upper for friction glides to keep sturdy when pulling / pushing. Mark center of 4 holes on cabinet face where door will mount. I used blue tape to get a pretty true center. Make sure you are square at top so your door will look straight.Then pull out entire assy….Now Install upper glide shims left right on the upper portion of your cabinets. Pull entire assy out of frame. Disassemble rack from frame base. When sliding rack off frame Plastic catch left pulls Up. Plastic catch right pushes down. Place frame bottom back in cabinet line up frames on ink pen Mark’s on cabinet bottom you made earlier. Eye ball back positioning.Press 4 screw holes with awl and screw down base on cabinet floor.I posted the steps because their directions (sparse wording) stated 7/8″ back. My method gave me a good fit and a One shot install 10 screw holes 10 screws. My door face I just held it in place and installed top first holding it up and screwing it one. My door face is 6″ so light enough to hang it semi easy. Bottom line this unit is quality and you feel the quality when sliding out after installation. I pulled one row off to allow for tall cans of Pam, olive oil. Etc.Happy New Year.

Good product but you need to be very handy to get a perfect installation
This is a well made product and works well once installed. The installation is not as easy as it may seem. I had three problems to overcome.First, the drawer slides needed to be removed from the base. The two outer ones have plastic levers to disengage them…no problem. But the center one was held in place by a punched “tang”, so it would not disengage. I had to unscrew the entire assembly and cut out the tang with a Dremel. No worries as it will not be seen and does not affect functionality after reassembly. An improvement would be to have the plastic lever in all 3 slides.Second, one of the metal tabs on the front, which are for attaching to the cabinet door, was in an inconvenient place. It lined up with one of the “cup holes” left after removing the door hinges. This meant there was no good way to fasten that one. I solved this by filling the hole with 2 part epoxy. Let that cure overnight, and was able to screw into it. An improvement would be a way to easily move the metal tabs up or down a little. They fit into grooves, so a few more groves could be milled at the factory.Finally, door alignment. No instructions on how to actually accomplish this. Here is how I solved this. With the slider installed and pushed all the way into the cabinet I stacked some blocks of wood on the floor in front of the cabinet. Then set the door on top, held in place with fingertips. Measured the overlap on the cabinet face frame. Added or removed blocks until the top and bottom reveal looked like other cabinets. Then moved the block stack forward about 1 foot. Set the door on the blocks and pulled the slider out to meet it. Used 2 soft jaw clamps to hold together. Adjusted the door left or right so the door was centered on the slider (Slider base is centered in cabinet, so this will ensure correct left to right reveal). Once clamped, slide the metal tabs out to align with the thickest part of cabinet door and fasten with screws. Remove clamps and blocks, and you are done…perfect alignment.All in all, nice product. But they can manufacture it better for a more flexible installation. Do not be in a hurry to install it, and if you are not handy, get a handy friend to do it for you.

Fit perfectly, easy to install, no issues. But you need to make sure you have the right measurements and decide on the distance between the shelves before you install it, because if you change your mind on the shelf heights after installation, you have to remove the shelving and start over.We use it for our spices and condiments so we can easily see everything we have.

Every morning I would wake up and have to basically crawl into my horrid 8.5” wide cabinet and get my cats food. Not anymore !!!This unit was the diamond in the ruff I had been looking for to make use of my nuisance kitchen cabinet. Before I couldn’t put anything in that sliver of a cabinet but this has changed everything. Took me 30 mins to install and works well. It’s a little tricky to line up your old door/drawer so it aligns perfectly but you need to expect some sort of difficulties when modifying anything from one design to another.Overall great product. Could use some super strong slides so it is sturdy when fully loaded and being abused by whoever but it’s definitely worth the price for the convenience and space it allows you to make use of.