RiverRidge Somerset Two-Door Bathroom and Laundry Wall Mount Storage Medicine Cabinet with Open and Adjustable Shelf – White

Amazing product
This is a well-made cabinet that feels very solid. I’m not positive, but I think it’s real wood or at least better-made particle board than some Swedish products.Assembly instructions were almost perfect: I liked how the bags of hardware were labeled to match the pictures in the instructions. There were written instructions, but in some places they were difficult to understand. The beginning and end of the instructions were a breeze to get through and were well-done. However, the middle section could use a bit of work; there was too much to do in one set of instructions, and the pictures could have been clearer.I also liked that one of the first things I pulled from the package was a note with a new pack of screws stating that the other screws weren’t sized appropriately so the manufacturer included a new, better-sized pack of screws. That tells me the company either listens to customer feedback or is constantly looking to improve their products (or both!).I had some issues with installing the cabinet, but they were my own fault: I’m writing about it here in the hopes that some future customer will see this and not make the same mistake I did. To start, the cabinet includes two screws and matching drywall anchor screws (essentially, you screw the anchor into the wall, then screw in the machine screws). Marking the wall for the holes was a breeze with the included template: I wish more manufacturers would do this! My one hang up (no pun intended) was that I couldn’t find a weight rating for the anchors; I have metal ones that are rated up to 50lbs and should have used those. As a result, I went with toggle bolts, which was a bad move. I opted to hang this cabinet without help, and it’s hanging over my toilet so it took quite a bit of acrobatics to squeeze my (admittedly small) hands behind the cabinet to squeeze shut the toggle bolts so they would fit in the holes I drilled. Then one of the anchors decided to spin like crazy instead of locking into the drywall like the first one. I think the included anchors should be sufficient because you can’t exactly store a ton of stuff in this cabinet anyway, but if you’re worried, get the metal drywall screw anchors or screw it into a stud; don’t use toggle bolts.Overall, I’m very happy with this product. Also, I recall someone asking if the mounting holes drilled in the cabinet are spaced 16″ apart for screwing into studs. They’re not: they’re 12.5″ apart.

very nice cabinet for the money
This complaints that the doors weren’t the same size, the holes were drilled in the wrong place, and the doors hung uneven wasn’t the case with our cabinet. It was very well packed, the finish was very nice, there were no nicks or chips, and it’s fairly easy to assemble with the following caveats. #1 is Patience. I recommend you glue all the wooden dowel rods with an adequate (a small amount oozes out) amount of “liquid nails” (immediately wipe off the excess with small sections of a paper towel and immediately dispose of them to prevent a mess) from a hand held tube found in any hardware/home store and let them dry overnight. Don’t use the anchors that come with the cabinet, I have pictured anchors that won’t come out of dry wall unless you were planning on sitting on the cabinet. I added 2 additional brackets (pictured) towards the bottom to stabilize the cabinet. These brackets have white plastic sleeves that slide over them to give them a professional appearance, and are barely noticeable. (Amazon). When installing the doors, don’t tighten down the screws until they’re all in and then go around the tighten the screws adjusting the doors as you go so they hang straight. If you simply tighten them as you go without being careful that they hang straight, they won’t! And you’re working with particle board, so in general, don’t over tighten the screws, easy to strip. If you install extra brackets like I did, drill out the holes, you can’t just install screws without drilling the holes out first. The screws that attach the back panels stick out, so if you slide it around when hanging it on the wall, you’ll damage you’ll scratch and gouge your dry wall, it takes 2 people, mark your holes from the cabinet, not the template supplied, put in your anchors and then hang it. As you can see, the cabinet is very attractive, the doors hang straight, and it holds plenty of oversized toilet paper, the sole purpose for this cabinet. It’s a delicate piece, it won’t take a lot of abuse, and it’s not for storing a heavy load. If you think you’re going to throw it together in an hour and put it up, don’t buy it. If you take your time, glue and dry, pay attention as you’re putting on the doors, carefully mark your wall holes and use good anchors, you will be very pleased with your purchase. We love it. Sorry for the sideways pictures but you get the point.

Sturdy and stylish
Instructions are not too bad. I built this sitting on the floor in about 30 minutes. I would recommend using glue with the wood dowels. It didn’t come with any, but even Elmer’s white glue would be better than nothing. Otherwise you’re relying on just the metal screw things to hold it all together. I personally don’t like wobbly furniture. With using glue, mine is very sturdy. I used metal molly bolts for securing to the drywall. Those plastic screw-in ones they include don’t look adequate to me. It is solid and has some weight to it. Last thing I want is this thing falling on me while on the toilet…

وصلني وسخ ومخدش ومساميره منثوره وتاخر جداً في الوصول ، لاباس به

Nunca me llego a México lo pedí dos veces y decía que no pudia cruzar la frontera.

Loving my new cabinet! I spent about an hour putting it together and I was pleasantly surprised at how nice the quality was. It went together easily and there were no issues with any of the parts. The cabinet doors hang perfectly level and the paint is even with no marks. I am only giving it four stars because I am very annoyed that they don’t include white cam lock covers for at least the cam locks that are clearly visible in the open shelf area (still searching for some to purchase as it looks unfinished to just leave them uncovered).